Measurement and instrumentation

Construction: capsule, bellows, Bourdon tube, digital
Diameter from 40 to 250mm
Accuracy class from 4 to 0.1%
Range from -1 to 2500Bar
Unit of measure: Bar Kg / cm2, PSI
Material elastomers, aluminum, brass, 304 stainless steel, 316 TI stainless steel, Monel
Connection: 1/8 to 1 ½ Gas / NPT
Outputs: Relay, current on digital version

Construction: diaphragm, bellows, digital
Range from -1 to 800Bar
Elastomer material, stainless steel
Connection: 1/8 to 1 ½ Gas / NPT
Outputs: 1 or 2 Relays

Construction: Piezoresistive silicon, Ceramic, metallic
Power supply: 24VDC
Accuracy from 1 to 0.1% FS
Range from -1 to 1600Bar
Unit of measure: Bar Kg / cm2, PSI
Material stainless steel 304, 316
Connection: 1/4 to Clamp
Electrical connection: DIN 43650, M12, Shielded cable
Outputs: current or voltage

Separators: industrial, food, elastomer
Glove finger: brass, stainless steel
Siphon, damper fitting, valve, manifold
Fittings

Material: Pvc / PP / PVDF / Stainless steel Glass
Range: from 3 to 50,000 liters / hour
Magnetic float for Relay or 4-20mA output

Construction: rotary piston, single jet, turbine, tangential turbine, oscillating disc, oval wheels,
Materials: brass, steel, coated steel, stainless steel, PP, acrylic, PVDF, PFA
Connection: 1/8 to 4 Inches
Display: needle, totalization reset
Output: pulses

Conductive fluids> 5µS / cm
Dn 2.5 to Dn 3000
Outputs: pulses, frequency, Hart, Modbus, Profibus PA / DP, Profinet,
Pressure: up to 400 Bar
Materials: stainless steel, PVDF coated, PFA coated
Temperature from -20 to 180 ° C
Power supply 24Vdc / 220VAC / Battery
IP69, Atex, 3A, FDA, EHEDG

Liquids, gases, steam
Dn 25 to Dn 3000 online, 6000 non-intrusive
Outputs: pulses, frequency, Hart, Modbus,
Pressure: up to 490 Bar
Materials: stainless steel, PVDF coated, PFA coated
Temperature from -200 to 600 ° C
24Vdc / 220VAC power supply
IP68, Atex, 3A,

Liquids, gases, steam
Dn 15 to Dn 600 / Dn2000 for the Pitot tube probe
Outputs: pulses, frequency, Hart, Modbus, Profibus PA
Pressure: up to 160 Bar
Materials: stainless steel
Temperature from -270 to 400 ° C / 1000 ° C for the Pitot tube probe
24Vdc / 220VAC power supply
IP68, Atex, 3A, FDA, EHEDG

Liquids, gases, saturated and superheated vapors
Dn 15 to Dn 300
Outputs: pulses, frequency, Hart, Modbus, Profibus PA
Pressure: up to 16 Bar
Materials: stainless steel
Temperature: "30 to 350 ° C
24Vdc / 220VAC power supply
IP68, Atex,

Liquids, gases
Dn 0.25 to Dn 400
Outputs: pulses, frequency, Hart, Modbus, Profibus PA / DP, Profinet,
Pressure: up to 160 Bar
Materials: stainless steel
Temperature from -200 to 400 ° C
24Vdc / 220VAC power supply
IP68, Atex, 3A, FDA, EHEDG

Gas
Dn 0.25 to Dn 400
Outputs: pulses, frequency, Hart, Modbus, Profibus PA / DP, Profinet,
Pressure: up to 160 Bar
Materials: stainless steel
Temperature from -200 to 400 ° C
24Vdc / 220VAC power supply
IP68, Atex, 3A, FDA, EHEDG

The simple and proven operating principle of float switches allows a very wide range of applications. The switching operation does not require any power supply.
Material elastomers, aluminum, brass, 304 stainless steel, 316 TI stainless steel, Monel
Relay output

As soon as the liquid covers the sensor, the refractive index changes at the separation surface.
Materials: PP, stainless steel
PNP output
12.24Vdc power supply
Temperature 85 ° C Max

The vibrating blades of the detector constituting a tuning fork enter into vibration by piezoelectricity thanks to a quartz. The vibrations are damped when the blades touch the liquid.
Materials: stainless steel
Process connection: ½ to Clamp
Maximum probe length 2500mm
PNP, NPN, relay output
24Vdc power supply
Temperature: "50 to 150 ° C Max

The microwave pulses are guided along a cable or rod and reflected off the product surface.
Materials: stainless steel, PFA
Process connection: ½ to Clamp
Maximum probe length 5000mm rod, 75 meters cable
PNP, NPN, relay, 4-20mA output
24Vdc power supply
Pressure 400bar
Temperature: "196 to 450 ° C Max

The sensor and the tank form the 2 electrodes of a capacitor, the change in level causes a change in the measurement signal.
Materials: stainless steel, PTFE, FEP
Process connection: ½ to Clamp
Maximum probe length 20m
4-20mA relay output, Profibus
24Vdc power supply
Temperature: "50 to 100 ° C Max

The cell measures the height of liquid.
Materials: stainless steel
Process connection: ½ to Clamp
Cable length on request for entry from the top of the tank
4-20mA IO LinK output
24Vdc power supply
Temperature: "50 to 200 ° C Max

The cell measures the height of liquid.
Materials: stainless steel
Process connection: ½ to Clamp
Cable length on request for entry from the top of the tank
4-20mA IO LinK output
24Vdc power supply
Temperature: "50 to 200 ° C Max

The sensor sends microwave signals to the product, which reflects them. The wave travel time allows the sensor to calculate the level.
Materials: stainless steel
Process connection: ½ to Clamp
Length
4-20mA IO LinK output
24Vdc power supply
Temperature: "50 to 200 ° C Max

Fitting, contact, bayonet, dial probes, ambience, digital, portable
Pt100, Pt1000, Ni1000, Ni1000TK5000 (Ni1000-LG), NTC 1.8k Ohm, KTY81-210, KTY81-110, NTC5K, NTC10k, NTC20k, NTC30k, NTC50k, NTC10k, LM235Z, NTC10K-SATCHWELL (Others on request).
Display, alarm output and 4-20mA on digital version